Package Includes: (1) JBL CSMA280 Commercial/Restaurant 2 x 80w Amplifier 4ohm/8ohm/70V/100V 8 inputs (2) Pair of JBL CONTROL 16C/T 6.5 30w 70v Commercial Ceiling Speakers For Restaurant/Bar (1) JBL CSR-V White Wall Volume Controller For Select CSM/CSMA/VMA Mixer Amplifiers Features of CSMA280: JBL CSMA280 Commercial/Restaurant 2 x 80w Amplifier 4ohm/8ohm/70V/100V and 8 inputs For Commercial and Industrial Use 80W into 8 or 4 Ohm Loads 10W Per Channel 8 Input Channels 2 Output Channel Usable with 70 & 100V Systems Euroblock Mic/Line & RCA Inputs Hi-Z & 27V Phantom Power Switches Sleep Mode & 2 Auxiliary Outputs Voice Activated Ducking & Priority Mute Specifications of CSMA280: Maximum Output Power: 800 W per channel into 4 Ohms or 8 Ohms 1 kHz = 0.5% THD Insertion Loss: 1 dB maximum for 70 and 100 V outputs Continuous Power: 10 W per channel Line Output Level: 5.0 V RMS into 10 kOhms Input Sensitivity: To obtain full rated power at 8 Ohms (or 5 VRMS to line output). Mic Input: 3 mV RMS. Line Input: 775 mV RMS. RCA Input: 300 mV RMS Number of Channels: Input: 8 Output: 2. Frequency Response: Measured at 2.83 V RMS into rated load impedance at any output. 4/8 Ohms Output: 20 Hz - 20 kHz ±2 dB. 70 V/100 V Outputs: 80 Hz - 15 kHz ±2 dB. Line Out: 20 Hz - 20 kHz ±1 dB Total Harmonic Distortion (THD): Measured at 2.83 V RMS into rated load impedance at any output. Power Amplifier Output: <0.5% 20 Hz to 20 kHz. Line Output: 0.05% typical Signal to Noise Ratio: > 90 dB Nominal Input Impedance: Mic: 400 Ohms. Line: 20 kOhms (balanced). RCA: 50 kOhms. Minimum Load Impedance: Low Impedance Output: 4 Ohms. 70 V Output: 120 Ohms. 100 V Output: 240 Ohms. Crosstalk: -70 dB @ 1 kHz Features of CONTROL 16C/T: (2) JBL CONTROL 16C/T 6.5 30 Watt 70v Commercial Ceiling Speakers For Restaurant/Bar Components: 165 mm (6.5 in) high output driver with polypropylene cone and butyl rubber surround 19 mm (0.75 in) soft-dome liquid-cooled tweeter Blind-mount backcan for quick and easy install Dual conduit/cable clamps Combined 70V/100V and low impedance direct operation 50 Watts at 8O nominal setting 30W multi-tap at 70V/100V 62 Hz – 20 kHz bandwidth with wide 110° coverage High 91 dB sensitivity for high maximum SPL Color: White Specifications of CONTROL 16C/T: Frequency Range (-10 dB): 62 Hz – 20 kHz Power Capacity (at low-Z) 100 Watts Continuous Program Power 50 Watts Continuous Pink Noise Transformer Taps: 30 W 15 W 7.5 W @ 70V or 100V (plus 3.8 W @ 70V only) Frequency Response (±3 dB): 96 Hz – 15 kHz Nominal Sensitivity: 91 dB Nominal Cov
